Spray can straw holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I chanced upon this https://www.thingiverse.com/thing:5354341 and was impressed with by the simple design. I have a…
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 96
- Makes
- 3
- Views
- 630
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Update 9 Apr 2023: Add enlarged straw hole version (+0.2mm diameter). I have not tested printing this, will do so and update if issues are observed.
*****
I chanced upon this https://www.thingiverse.com/thing:5354341 and was impressed with the simple design. I have a few WD-40 and other spray cans with straws, tried it and it works!
I had some initial difficulty inserting the straw into the hole, it eventually went in.
And so I did some design changes to improve the straw insertion.
I had the hole for the straw elongated along a slant surface with a chamfer to guide the straw in easier.
I did it for the 360ml (65.5mm) and 250ml (52.5mm) can sizes.
It seems better to me, hope others feel the same.
*****
Clicking on my AliExpress affiliate link below will give me a small kickback
if you purchase something within three days. (at no extra cost to you) https://s.click.aliexpress.com/e/_DmpFxU1