Magnetized Bit Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the original by @VINNIE3000 Please check out their design.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 1
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printer brand: Anycubic
Printer: Kobra S1 Max
Supports: NO
Resolution:Standard / 0.20mm
Infill: 15% (If you prefer more weight use 50%)
Material: PLA (you can use any material but PLA is the cheapest)
Notes: Easy prints with PLA. You can print with PETG/ASA/ABS for a stronger print but in all hoenesty, unless you are throwing it against a wall all day... PLA is perfect.
What you need
20x 5*3mm neodymium disc magnets
3x 8*5mm neodymium disc magnets
3x m3x20mm cylinder head machine screw
3x m3 flat nut
some kind of carabiner
Instructions
Take each side piece and press in magnets until flush.
Insert Magnets in SIDE holder and glue to Middle (Bitholder MID)
place the sides and middle in place and Insert screws and nuts - tighten it down.
Put the carabiner on the end
Place whatever 1/4" bits you want to carry with you and thats it!
I put in an extension and a quick release and all the bits I need!