Crescent Ruler, 12 in & 9.5 in Arcs, Quilting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Crescent arc templates, 12 in and 9.5 in, for orange peel and curved quilting. STLs, 3MFs and OpenSCAD source.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 14
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The crescent ruler quilters keep asking for, in two sizes, with the drawing edge left exactly where the maths puts it.
Files
STL: crescent_12in_arc_mw.stl, crescent_9p5in_arc_mw.stl. Plain mesh, any slicer.
3MF: crescent_12in.3mf, crescent_9p5in.3mf. Bambu Studio project with my tested settings (PrusaSlicer opens the geometry).
SCAD: crescent_mw.scad. The parametric source, for any other size.
What it is for
Lay it on the fabric, draw along either edge and cut. The outer edge and the inner edge come from two circles, so the band keeps the same crown along its length. Quilters use it for orange peel, cathedral window and clamshell blocks, and for marking gentle arcs on borders. Away from sewing it is a moon for a sign, a tag or wall art.
Need a different size? Customise in OpenSCAD
Download the .scad file and open it in OpenSCAD (free). Every option below is in its Customizer panel.
Set the arc diameter, the length, the crown at the middle and the tip width, in inches. Thickness is 1/4 in by default, matching shop-bought templates. There is a hanging hole and a chamfer on the top face only.
Why it is shaped the way it is
The bottom edge is square and vertical and the chamfer is on the top face only, so a pen cannot creep underneath and draw inside the true line.
It refuses bad settings rather than printing them: a band wider than its own arc, a tip thinner than the nozzle can print, or a hole with no material around it all stop with a message.
Pairs with
Concave Curve Template: two inward arcs for curved piecing and quilting lines
Circle Templates: rings for 4, 6, 8 and 10 in circles
Quarter Circle Template: drunkard's path and quarter-circle blocks
All of them are in my Quilting & Sewing Tools collection.
Print settings
Material: PLA, or PETG if it will get knocked about
Layers: 0.2 mm, or 0.12 mm for the smoothest drawing edge
Walls: 4 to 5, because the edge is the functional surface
Infill: 15% gyroid. The walls make the edge, so more infill only adds weight
Supports: None, flat on the plate as oriented
Elephant foot compensation: 0, and no first-layer chamfer
Wall order and seam: Outer wall first and a scarf seam, so the drawing edge stays clean and true. The 3MF here already has both
The design decisions and the testing here are mine. The OpenSCAD was written with Claude, and every version was rendered and measured before it went up.
If it is useful, a like and a make with a photo really help. I read every comment.
Also on MakerWorld: https://makerworld.com/en/models/3323901
