OpenAI Blossom Logo - 248 mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Large, one-piece OpenAI Blossom decoration. Flat, support-free print with seven open cutouts; editable OpenSCAD and SVG included.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 5
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Share Alike
A large, flat OpenAI Blossom logo for indoor decoration. The seven openings go all the way through the part.
Size and printing
- STL dimensions: 248 x 245.786 x 6 mm, one connected part.
- Print with the broad, flat underside on the bed; no supports.
- Designed for a Bambu Lab P1P with a 0.4 mm nozzle.
- This is a near-limit print on a 256 x 256 mm plate. The included P1P project uses approximately 13.05 degrees of rotation, giving a footprint of 251.17 x 234.18 mm. Keep the front-left exclusion zone clear and check the complete plate before printing.
- The supplied 3MF uses Bambu PLA Basic, 0.20mm Standard and Textured PEI Plate, without brim or skirt. Choose the correct profile and re-slice for your actual filament and printer.
Included files
The STL is the production part. The P1P 3MF contains the previously sliced project and G-code; inspect its settings and placement before use. The SCAD and local SVG are both required to edit and regenerate the model.
openscad -o openai_logo_248mm.stl openai_logo_248mm.scad
Change logo_width or thickness in the source, then export and slice again.
Verification
The existing P1P slice was checked on 2026-10-01: approximately 1 h 51 min and 78 g with the stated PLA profile, no supports. These are slicer estimates. No physical test print is claimed.
Artwork
The Blossom artwork belongs to OpenAI. The local SVG was taken from the official OpenAI logo archive on 2026-10-01. This is an unofficial decorative 3D adaptation; the listing does not imply endorsement or ownership of the underlying logo.