Claude Spark Logo - 252 mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Large, one-piece Claude spark decoration, 6 mm thick. Pre-rotated for a P1P plate, with editable OpenSCAD and SVG source.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 1
- Views
- 31
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Share Alike
A flat Claude spark (starburst or inkblot) decoration. One solid part, intended for an orange, single-color print.
Size and printing
- STL footprint: approximately 251.79 x 244.00 mm; thickness 6 mm.
- Upright artwork: approximately 251.6 x 251.6 mm. The STL is already rotated 18.4 degrees to fit the P1P plate.
- Print flat as exported, without supports, brim or extra plate objects.
- Center on the 256 x 256 mm bed and preserve the supplied rotation. Do not let automatic arrangement rotate it again.
- Designed around a 0.4 mm nozzle. Check the plate edges, front-left exclusion zone and front purge line before printing. Only about 2 mm remain at the left and right edges.
Editable source
Keep the SCAD and SVG together. Adjust footprint_depth or thickness to change the size. If changing plate_rotation, check both footprint dimensions again.
openscad -o claude_tintenklecks_252mm.stl claude_tintenklecks_252mm.scad
Verification
The existing P1P slice was checked on 2026-10-02 using the actual P1P start code, a 0.4 mm nozzle, 0.20mm Standard and PLA Basic. Estimated time and material: approximately 1 h 48 min and 83 g. No physical test print is claimed; use the profile for your actual material.
Artwork
The logo belongs to Anthropic. The local SVG contour came from the Claude wordmark on claude.com on 2026-10-02. This is an unofficial decorative 3D adaptation.