1 / 5
Baby Shower Pacifier Fishing Game (Hook-a-Dummy) — image 1
1 / 5

Baby Shower Pacifier Fishing Game (Hook-a-Dummy)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Hook-a-duck for a baby shower: floating dummies with the ring up, six shield shapes and a hook. 3MF and OpenSCAD source.

Rating
0 / 5
Likes
0
Downloads
8
Makes
0
Views
37
Reviews
0

Updated at source:

Model information

License
Standard Digital File License

Hook-a-duck for a baby shower: floating dummies with the ring standing up, six shield shapes and a matching hook.

I made these for our own baby shower. The dummies float teat down with the ring standing up, and guests try to catch them with the printed hook on a garden cane. We're using a baby bath for the real game, which feels about right; a paddling pool or a washing-up bowl works too. Hook the most and you win.

Files

  • 3MF, full game: hook_a_dummy_game.3mf. 6 dummies and 2 hooks on 5 plates, 135 g. Bambu Studio project with my tested settings (PrusaSlicer opens the geometry).

  • 3MF, one dummy: hook_a_dummy_single.3mf. One heart dummy on one plate, 22 g. Print this first, glue it and float it in the sink.

  • SCAD: hook_a_dummy.scad. The OpenSCAD source (teat, shield, handle, hook).

The plates in the full game

Each plate is one part type, so you just change filament between plates. You get a multicolour game without an AMS.

  • 1: Shields: classic, heart, star; 31.1 g; 1 h 59 min

  • 2: Shields: cloud, flower, butterfly; 29.8 g; 1 h 59 min

  • 3: 6 teats (solid); 54.6 g; 3 h 33 min

  • 4: 6 handles with rings; 14.0 g; 37 min

  • 5: 2 hooks; 5.4 g; 16 min

Please keep the teats solid

The teat is the keel. Printed solid, it holds the dummy teat down with the ring pointing up. At normal infill some shields will happily float upside down instead. The 3MF files already set the teats to 100 % infill per object, so leave that as it is. If you slice the parts yourself, set it on the teats.

One honest note: they don't right themselves. Put one in the water teat down and it stays that way, but if one gets knocked onto its side it'll sit there until someone nudges it back.

Putting it together

  1. Push the handle's pin through the hole in the shield and into the teat. The pin is rectangular, so the ring only goes on one way.

  2. Take it apart, add a little superglue or epoxy to the pin, and push it back together.

  3. Let it cure, then float it in the sink, teat down. It should sit flat with the ring up.

  4. Tie the hook to a cane or dowel with about 50 cm of string through the eye.

Print settings

  • Material: PLA. Any colours you like; white teats look most like the real thing

  • Layers: 0.20 mm, with the shields and teats at 0.08 mm per object, so the curved tops come out smooth

  • Infill: 15 %, teats 100 %

  • Supports: None. Shields print flat side down, teats flange down, handles and hooks lying flat

Slicing the parts yourself? Use variable layer height on the shields (in Bambu Studio: right-click > Variable layer height > Adaptive, then Smooth). The shield tops are a shallow curve, and at a single 0.20 mm layer height you'll see rings on them.

Shown in Bambu PLA Basic: Purple, Bambu Green, Hot Pink, Pumpkin Orange and Sunflower Yellow, with Jade White teats.

Safety

This is a game prop, not a dummy or soother. Never give one to a baby or a child under 3, and don't put it in your mouth. If it comes apart the pieces are small parts, so check the joints before each game. Not for food or drink.

The design decisions and the testing here are mine. The OpenSCAD was written with Claude, and every version was rendered and float-tested before it went up.

Update log

  • v1.0: first release.

If it is useful, a like and a make with a photo really help. I read every comment.

Also on MakerWorld: https://makerworld.com/en/models/3420518

Tags