1 / 5
LEGO 10318 Concorde Wallmount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
45 Degree Wallmount for The LEGO Concorde
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
I did not find a mount for my LEGO Concorde so I made my own.
The print is in two parts both will fit in a standard 256x256.
Required Hardware is one M3x40 (longer will do the job) and six wood screws, the mount was designed around Biltema 4,0 x 40 MM Woodscrew (Art. 89-209) but any Woodscrew of a similar size should work.
For print settings I did 0.1 Layerheight, 6 Walls, 15% Gyroid Infill but any default strength profile should do.