Hedgehog Silhouette "SPIKE" - because he has spikes, hehehe, and a spike for poking into the lawn/border/flowerpot/etc.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fun garden ornament
- Rating
- 4 / 5
- Likes
- 4
- Downloads
- 6
- Makes
- 1
- Views
- 27
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a hedgehog silhouette-style to poke into soil or flowerpots, couldn't find one so adapted an idea from a photo and here it is.
First attempts at printing were troublesome as Cura wants to draw a load of fiddly bits first which then end up lifting up on my Elegoo N3P despite careful calibration and slowing the print down etc. In the end I nailed it by printing an external-only brim with offset 0.7mm so it doesn't attach to the model. This forces Cura (v4.8) to print it MUCH more sensibly and now they're all coming out perfect.
So now apart from the offset brim it's all normal settings, no supports, it's all tops and bottoms so no infill setting needed. I used 0.4mm nozzle and 0.2mm layers, PLA+ but if you want it in strong sunshine you may want something with a higher melting point and more UV resistance. Mine survived all the heatwaves in 2026 without any visible damage but it's reasonably sheltered under a rose bush :o)
If you have a preference for the finish on one side (textured printbed, smooth top face, whatever) and want it facing the other way, just flip it over in the slicer, it's just a simple perpendicularly extruded pattern.
It's about 14cm nose-to-tail, and stands about 8cm tall excluding the spike. I don't see any reason why it shouldn't be scaled (equally in the XY axes to retain proportion) to get it bigger or smaller, although if very small then the bits between the holes could get tricky to print. I wouldn't scale it any thinner in the Z axis as it would be too delicate, it's about 1.2mm thick by default, but you could make it thicker by increasing the Z size without any issues if you want a huge one and need it stronger!
Please Like this model if you find it useful.
If you REALLY like it, https://www.buymeacoffee.com/gigabeast :o)