Multimeter tweezers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Works for my Voltcraft tips, but might work for other ones as well. Source files included.
- Rating
- 0 / 5
- Likes
- 62
- Downloads
- 170
- Makes
- 1
- Views
- 451
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
As the name suggests, this quick print converts your multimeter into a one-handed tweezer-style measuring device. The tips are held with friction which is very strong due to the taper on the tips and the slight elasticity of the material. If your measuring tips don't fit, you can adapt the geometry yourself; it's just a simple rotated cut that needs to be tweaked.
As it should be with all open source parts, I did not only upload the stl, but also a step and the original f3d file.
You don't need special print settings, anything will work. I used 0.15 mm layers and 0% infill but again, anything should work. The same goes for the print material. I did use PETG but PLA should also work; the bending is not that much.