Birdfy Pro2 shade / umbrella
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.53 – €5.54 net (excluding VAT)
For file: BirdFyUmbrella-Shade_0.4n_0.25mm_PETG_MK4S_4h4m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.03 excluding VAT (range midpoint).
- Weight reported by the author
- 89 g
- Print time reported by the author
- 4.07 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
a simple extension to the feeder to shelter birds and food from rain and sun
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This simple shade is attached to the existing top with 3, 6-32 screws.
Printed here in "transparent" PET-G with some support (see photo) and assembled by drilling a center hols in the top as shown in the photo, then following us with the other two after fastening the center hole with a screw.
The print works quite well in this orientation and produces an interesting pattern. I use .25mm Structural with organic support.