Mesh clips for basement window well grates
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mesh clips for basement window well grates. Prevents leaves & debris while keeping good airflow and natural light.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 21
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
There are two versions of the clip: a symmetrical one and a slightly off-center one. Depending on the spacing of the grid, you can use these two variants to adjust the hole position to match the grid pattern. I recommend a stainless steel mesh with a grid size of around 6mm.
The clip is designed to prevent compression once the screw is fully tightened. The resulting expansion creates an undercut that securely locks the clip into the grid and prevents it from being pulled out.
Part list:
clip
cylinder head screw e.g. ⌀4x20
hexagon nut M4
washer M4
Print instruction:
material: PETG
supports: no
layer height: 0,25mm or 0,32mm
nozzle diameter: 0,4mm or 0,6mm
brim: not required
enclosure: not required