RC Differential Bevel Gear Concept (18T, Not Print-Ready)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Concept preview of an 18-tooth RC differential bevel gear. Open mesh, unverified geometry, display only.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 19
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
CONCEPT PREVIEW, NOT A FUNCTIONAL OR PRINT-READY GEAR. An 18-tooth bevel gear for an RC car differential side gear, built from the Playground's /gear bevel command plus a body, a tooth-free front land, a 5.25 mm bore and a 9 x 2.9 mm rear pocket with small corner cuts.
Target spec: 18 teeth, 20 degree pressure angle, about 17 mm addendum circle, 5 mm total thickness, 9 mm tooth-free front land, 5.25 mm center bore.
Honest status: the teeth are a sampled 2D involute profile with a uniform taper, not verified conjugate bevel geometry. The mesh fails the closed-manifold check (open edges), the requested 0.2 mm outer chamfer is missing, and the pitch cone and pocket placement are unconfirmed. Do not use it as a working differential part or for machining. It is a display and modeling example. Created with AI assistance.
Full build article with the recipe and what is unresolved: https://blog.truegeometry.com/0_0_0_0/blogs/post-6533eda7.html
All build articles: https://blog.truegeometry.com/0_0_0_0/blogs/post-0bfd1910.html
Full Playground command recipe. Paste the commands one at a time into the TrueGeometry Playground chat box, top to bottom. The /gear bevel line sets teeth and size; the later body, bore and pocket values can be changed to your own spec.
/gear bevel 0.85 18 2.2 20 45 0
/tag_last Teeth
/move @Teeth 0 0 1.4
/parametric cylinder 6.5875 6.5875 3.6
/tag_last Body
/rotate @Body 90 0 0
/move @Body 0 0 -0.7
/union @Teeth @Body
/tag_last Gear
/parametric cylinder 4.5 4.5 4.9
/tag_last Flat
/rotate @Flat 90 0 0
/move @Flat 0 0 -0.05
/union @Gear @Flat
/tag_last Gear
/parametric cylinder 2.625 2.625 7
/tag_last Bore
/rotate @Bore 90 0 0
/subtract @Gear @Bore
/tag_last Gear
/parametric box 8.6 2.9 3.05
/tag_last PocketMain
/move @PocketMain 0 0 -1.025
/subtract @Gear @PocketMain
/tag_last Gear
/parametric box 9 2.5 3.05
/tag_last PocketCross
/move @PocketCross 0 0 -1.025
/subtract @Gear @PocketCross
/tag_last Gear
/parametric cylinder 0.2 0.2 3.05
/tag_last CornerA
/rotate @CornerA 90 0 0
/move @CornerA 4.3 1.25 -1.025
/subtract @Gear @CornerA
/tag_last Gear
/parametric cylinder 0.2 0.2 3.05
/tag_last CornerB
/rotate @CornerB 90 0 0
/move @CornerB -4.3 1.25 -1.025
/subtract @Gear @CornerB
/tag_last Gear
/parametric cylinder 0.2 0.2 3.05
/tag_last CornerC
/rotate @CornerC 90 0 0
/move @CornerC -4.3 -1.25 -1.025
/subtract @Gear @CornerC
/tag_last Gear
/parametric cylinder 0.2 0.2 3.05
/tag_last CornerD
/rotate @CornerD 90 0 0
/move @CornerD 4.3 -1.25 -1.025
/subtract @Gear @CornerD
/tag_last Gear
/setprop @Gear color #a9adb4
/origin
/view iso
/view fit 32