Kerf-Maker Pro
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Kerf-Maker! I used this one for inspiration: https://bridgecitytools.com/products/km-2v2-kerfmaker-pro.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Kerf-Maker! I used this one for inspiration: https://bridgecitytools.com/products/km-2v2-kerfmaker-pro. Before I sat out to make this, I found another one on here that I tried first…why re-invent the wheel, right? But I found the sliding dove-tail to be sorely lacking and overall just not up to the task IMHO. I had already bought the 4mm screws that the one I found on here was using, so you'll need a couple of 4mm machine screws and 2 nuts and if you want to also include the magnetic features that I've added, then 3 magnets for that. All parts will be listed seperately below.
So, into Fusion 360 I went and after about 5 iterations making progressively smaller tweaks and testing in my shop, finally have a version that I think is pretty damn solid so wanted to share it here.
Project file included is from Bambu Studio and set up for PET-G with 3 build plates for the various colors you might want to use; named as color-1, color-2 and color-3. Two of the plates have built in pauses to allow you to insert your 4mm nuts.
PARTS LIST:
1 - 4mm flat head screw (counter sunk variety) 18mm in length.
1 - 4mm flat head screw (counter sunk variety) 16mm in length.
3 - 8 x 2mm magnets (Just what I had on hand)
At any rate…Just finished a small project where I actually used it and thought I'd go ahead and take a few minutes to throw this together and post it here in case anyone else was interested in something like this!
Happy printing and stay safe in your shops!