1 / 5
Ten-Lobe Halloween Pumpkin Ornament - Native Playground Recipe — image 1
1 / 5

Ten-Lobe Halloween Pumpkin Ornament - Native Playground Recipe

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Original ribbed pumpkin with flat base and stem. Native CAD recipe included; untested display prototype.

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
10
Reviews
0

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Attribution

Original ten-lobe Halloween pumpkin ornament, designed in TrueGeometry Playground with native CAD commands. AI-assisted creation. No downloaded designer mesh was copied or traced.

DISPLAY PROTOTYPE, NOT PRINT-TESTED. This is a closed shelf or desk ornament, not a lantern, candle holder, toy, hanging ornament, or food-contact item. Keep away from flames, heaters, and small children.

Measured mesh envelope: 74.8 x 71.33 x 58 mm. Body height 48 mm; ten ribs with 10 percent radial amplitude. Stem is a tapered cylinder, 12 mm high, top radius 3.5 mm, bottom radius 5 mm.

Native build: seven equation-defined ring profiles, a straight guide, /sweep_variable with solid caps, then a stem cylinder. No booleans or external CAD geometry. The recipe file is included. Run the setup, send the sweep line separately and wait, then run cleanup and stem commands.

Mesh check: body 12,924 triangles; stem 128 triangles. Each shell had zero boundary edges, nonmanifold edges, and zero-area triangles after matching coincident vertices. Combined STL retains two overlapping closed shells, not one boolean-fused solid. The stem overlaps the body by 2 mm. Check that your slicer merges the overlap. This check does not establish physical printability, durability, or absence of every possible self-intersection.

Orientation: Playground is Y-up. In your slicer, place the flat body bottom on the plate and inspect lower-belly overhangs and stem layers. Use your printer's normal decorative-object profile; 0.2 mm layer height is only a trial starting point. No support-free, print-time, filament-weight, or strength claim is made. CAD colors do not carry through STL.

Released under Creative Commons Attribution. Please credit TrueGeometry and retain these limitations when sharing a modified version.

FULL TRUEGEOMETRY PLAYGROUND COMMAND RECIPE

Run the setup commands first. Send the /sweep_variable line separately and wait for success, then run cleanup and stem commands.

/unit mm

/3d_curve equation "(12*(1+0.10*cos(10*t)))*cos(t)" "0" "(12*(1+0.10*cos(10*t)))*sin(t)" 0 6.28318530718 160

/tag_last Bottom

/3d_curve equation "(24*(1+0.10*cos(10*t)))*cos(t)" "8" "(24*(1+0.10*cos(10*t)))*sin(t)" 0 6.28318530718 160

/tag_last Low

/3d_curve equation "(31*(1+0.10*cos(10*t)))*cos(t)" "16" "(31*(1+0.10*cos(10*t)))*sin(t)" 0 6.28318530718 160

/tag_last Lower

/3d_curve equation "(34*(1+0.10*cos(10*t)))*cos(t)" "24" "(34*(1+0.10*cos(10*t)))*sin(t)" 0 6.28318530718 160

/tag_last Middle

/3d_curve equation "(31*(1+0.10*cos(10*t)))*cos(t)" "32" "(31*(1+0.10*cos(10*t)))*sin(t)" 0 6.28318530718 160

/tag_last Upper

/3d_curve equation "(24*(1+0.10*cos(10*t)))*cos(t)" "40" "(24*(1+0.10*cos(10*t)))*sin(t)" 0 6.28318530718 160

/tag_last High

/3d_curve equation "(8*(1+0.10*cos(10*t)))*cos(t)" "48" "(8*(1+0.10*cos(10*t)))*sin(t)" 0 6.28318530718 160

/tag_last Crown

/3d_curve equation "0" "48*t" "0" 0 1 64

/tag_last Guide

/sweep_variable @Bottom @Low @Lower @Middle @Upper @High @Crown @Guide solid

/tag_last Pumpkin

/setprop @Pumpkin color #ed7d17

/delete @Bottom

/delete @Low

/delete @Lower

/delete @Middle

/delete @Upper

/delete @High

/delete @Crown

/delete @Guide

/parametric cylinder 3.5 5 12

/tag_last Stem

/move @Stem 0 52 0

/setprop @Stem color #496b2c

/view iso

/view fit

Full illustrated build article and customization guide:

https://blog.truegeometry.com/0_0_0_0/blogs/post-177d18fa.html

Blog

Playground