1 / 1
Steel spring mod for DeSteiner's Colt M1911
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I didn't have much luck with a printed PETG spring (even the stronger one), so I've made a steel spring mod for it.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 13
- Makes
- 0
- Views
- 133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I didn't have much luck with a printed PETG spring (even the stronger one), so I've made a steel spring mod for it.
You will need a 14mm (OD) x 100mm(length) x 1mm(wire thickness) spring, though an 110mm length will also work if you feel like making it abit heavier to press.
Smaller wire thickness should also work for less force as long as the outer diameter is 14mm