GMKTek G3 Plus Fan Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mounting socket including a lid to mount a 80mm fan to a GMKTek G3 Plus.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
The mounting socket includes the motherboard bracket, a fan shroud, a lid, and a clip that needs to be printed 4x.
The bracket, shroud, and lid can be printed in PLA. But the clips should be printed in something more flexible like PETG, otherwise they might break while slotting the fan shoud into the bracket.
I used a M.2 B Key to USB extension card to use the empty M.2 mount to provide a power source for the fan. I then used a 80mm Noctua USB fan that runs on 5V instead of 12V, shortened its cable so I could mount it inside the fan mount without the cable ever going outside of the case.
For the clips to be mounted to the fan shroud you will need screws with a thread diameter of 3.8-4mm.
The base is mounted with the same screws that originally fixate the original G3's lid mount to the motherboard.