1 / 6
Long Drive Pin Punch Case (5-Piece Set, Sliding Lid) — image 1
1 / 6

Long Drive Pin Punch Case (5-Piece Set, Sliding Lid)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Sliding-lid case for the common 5-piece long-drive pin punch set. Clicks shut; the lid features actual-size punch outli.

Rating
0 / 5
Likes
1
Downloads
0
Makes
0
Views
7
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial

A case with a sliding lid for the 5-piece long drive pin punch set that's sold by Harbor Freight (and under other names on Amazon and elsewhere). The punches lie side by side in fitted pockets, and the lid slides in on a dovetail and clicks shut. The lid shows an actual-size outline of each punch, its size, and a true-size dot for its tip, so you can match a punch to a pin at a glance.

Which punch set

It's a set of five long drive pin punches with black knurled grips. Mine is the Pittsburgh set from this Harbor Freight listing (item 93111). The same set is sold under other names on Amazon and elsewhere, usually titled something like "5 pc Long Drive Pin Punch Set".

  • Tip sizes: 1/8", 3/16", 1/4", 5/16" and 3/8"

How it works

Each punch sits in a stepped U-shaped pocket: full width for the knurled body, narrow for the pin, and only 0.5 mm wider than the punch, so it can't slide around. A finger scoop across the bodies lets you pinch a punch and lift it out.

The lid slides in from the open end on a dovetail. Near the closed end, a short flexible tongue cut into the lid rides over a small bump on the tray and clicks into place. The lid's artwork is raised 0.4 mm so you can print it in a second color.

Printing

  • PLA, 0.20 mm layers.

  • No supports, no brim. The tray prints open-side up (the dovetail undercut is a 30° overhang), and the lid prints with the artwork facing up.

  • For a two-color lid, change filament at 2.2 mm. The lid .3mf already has the change, and it prints the two artwork layers slower so the small letters come out solid.

  • Needs a bed about 210 mm long. It won't fit on an 180 mm bed.

Make it fit

The OpenSCAD file is parametric (OpenSCAD 2021.01 or later). The labels use the free font DejaVu Sans Condensed Bold. Change these at the top:

  • punch_len, body_len, P: your punches' overall length and body length, and each punch's label, body, and pin diameters.

  • clr: how much wider the pockets are than the punches (0.5 mm). Raise it if the punches stick, lower it if they rattle.

  • lid_clr: dovetail clearance per side (0.15 mm). Raise it to 0.20 if your lid is tight.

  • tongue_len, hole_d, dome_h: how firmly the lid clicks.

  • title1, title2: the text on the lid.

How AI Helped

This is my design. I decided how the case works and looks. An AI assistant worked with me on the OpenSCAD code to my specifications, checked the model's fit and printability, set up the slicer projects and renders, and helped me draft and keep track of the documentation.

Tags