1 / 5
Air Hockey Puck Holder for a Table Leg — image 1
1 / 5

Air Hockey Puck Holder for a Table Leg

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Holds 2 air hockey pucks on a table leg, mounted with one screw. Print one for each side of the table.

Rating
0 / 5
Likes
1
Downloads
0
Makes
0
Views
13
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

A holder that keeps air hockey pucks on the table, so they don't wander off between games. It screws flat to the side of a table leg with the open side up, and the pucks drop in on edge. Mount one on each side of the table and each player keeps 2 pucks at hand.

Pucks

Mounting

  • The back is flat, for a flat leg or brace.

  • One screw is enough. There are two holes, 20 mm apart; use both if you want to keep it from turning.

  • The holes take a #6 or #8 screw (4.6 mm). The head sits in a 10 mm recess, 3.5 mm deep, so a pan or round head stays below the pocket floor and out of the pucks' way.

Printing

  • PLA, 0.20 mm layers, 4 walls, 40% infill.

  • Print it flat side down, the way the STL is oriented. No supports, no brim: the lip over the pucks has a 45° underside.

  • G-code is included for the Prusa MINI/MINI+ (0.4 nozzle, Input Shaper firmware) and the CORE One L (0.4 HF nozzle)

How AI Helped

I designed this in Tinkercad. AI rebuilt it with changes I chose: it now holds 2 pucks instead of 3, the screw-head recess is deeper so a pan-head screw sits below the pucks, there's a second screw hole, the wall is an even 2 mm instead of thinning to under 1 mm at one end, and the lip over the pucks has a sloped underside so it prints without supports. The shape and the way it holds the pucks are my original design. AI also sliced the G-code, made the renders, and helped write this description.

Tags