1 / 3
Flush Mount for the Ring Solar Pathlight
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounts a Ring Solar Pathlight on a deck or other flat surface with one screw, in place of its ground stake.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 0
- Makes
- 0
- Views
- 12
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
A flush mount for the Ring Solar Pathlight. The light normally sits on a stake pushed into the ground; this lets you mount it on a deck, a step or any other flat surface instead. The light's tube locks onto the collar the same way it locks onto its stake.
Mounting
One screw through the center of the collar holds it down.
The hole is 5 mm with a countersink, for a #6, #8 or M4 flat-head screw.
Printing
Use an outdoor filament: PETG, PCTG or ASA.
Print it flange down, the way the STL is oriented. No supports, no brim.