BMG Wind 3DTouch mount E3DV6 and Volcano compatable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3DTouch mount for a Mellow BMG Wind extruder. Both normal and volcano suitable
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 46
- Makes
- 1
- Views
- 608
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
3DTouch (https://aliexpi.com/EWr7) mount for a Mellow BMG Wind extruder ( https://aliexpi.com/twlM )
Both normal and volcano compatable, for volcano mount your BLTouch from the bottom and from the top for normal E3DV6 (see photos)
To attach it to your extruder you will need 2 M2.5x8 screws
To attach 3DTouch to it you will need 2 M3x10 screws and 2 nuts
There is a version to use with heated insert nuts
Offsets for the setup are 0mm along one axis and 26mm along the other (my Ender setup X0 Y-26)
Print Settings
Supports:
No
Infill:
100
Notes:
Model optimized for 0.4mm nozzle with 0.2mm layer height and 100% infill.
Use brim, if your buildplate adhesion is not very good
Category: 3D Printer Parts