1 / 4
Gridfinity box organiser for HeroQuest — image 1
1 / 4

Gridfinity box organiser for HeroQuest

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A set of gridfinity compatible organisers for the HeroQuest board game.

Rating
0 / 5
Likes
2
Downloads
3
Makes
0
Views
97
Reviews
0

Updated at source:

Model information

Category
Board Games
License
Creative Commons — Attribution

HeroQuest (2021) Gridfinity Organiser

A set of Gridfinity bins to organise the 2021/22 HeroQuest core box: cards, dice, tiles, tokens, furniture, doors, miniatures and the character sheet pad. Everything is built to a standard 42 mm Gridfinity grid, so you can mix in your own bins or add more for expansions.

How it fits together

  • Designed for a 9 × 7 cell Gridfinity baseplate (made with GridFlock, 396 × 297 mm interior). Box interior depth: 94 mm, with about 14 mm of board and books lying on top. That's the size of the box I have, but I believe there is a deeper version of the box as well. You might want to measure your box and create your own baseplate using the gridflock generator.

  • No magnets. The board and rulebooks press down on the bins, so every stack reaches the same height: 11u (about 80.7 mm with the stacking lip).

  • Bins come in three heights, in folders: 4U (28 mm), 7U (49 mm) and 11U (77 mm). Stack a 7U bin on 4U bins to make 11U. Tall things (the card box, tall miniatures) stand alone at 11U.

  • Names show the size: name_WxD_Hu, for example dice_bin_2x1_4u.

What’s included

  • 4U: dice, tokens, an over-designed castle-themed skull and rat bin, base-set tiles, the character sheet pad (with finger access), plain spares.

  • 7U: furniture (two layouts), short miniatures, a plain 1×2.

  • 11U: cards (sleeved 66 × 91 mm, landscape) with two divider versions (one that clips in, and an easy version that can... easily be slotted in and out, doors (5×1), tall miniatures.

Miniature bins have a plain floor: glue in a thin steel sheet and put a magnet in each 25 mm base.

Printing: no supports, 0.2 mm layers. Print the card dividers flat.

Credits: Gridfinity by Zack Freedman, Gridfinity Extended by ostat, baseplates made with GridFlock (yawkat). HeroQuest is a trademark of Hasbro. This is a fan-made accessory, not affiliated with or endorsed by Hasbro or Avalon Hill.

Tags