1 / 3
MKS TinyBee Minimal Wall Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount for use with MKS TinyBee for vertical plotter. Requires at least 2x M3 screws (10mm) and nuts.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 3
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Minimal wall mount to be used with a vertical plotter. Can be mounted with 1-3 screws to wall. Requires at minimum 2 M3 screws (10mm) and 2 M3 nuts (max 4) to attach MKS TinyBee to the 3D printed mount.
Screw holes for mounting to wall: 5.5mm
Print with supports to fill M3 nut spaces that you can then pop out from the front by using Allen wrench or similar. M3 nuts are simply pushed in snug on the backside.