1 / 1
Qidi Plus-4 Z-Hight Stabilizer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here is a metod I find Helpful to reduce Z inconsistencies on the Qidi Plus4
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 60
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
For this First version, it's required to dismount both Z axis motors, slide them out completely, then get them back in whit the Z-Nut retainer and original Z-Nut (before going trough the bed frame) then passing the bed frame adding the Z-Nut Plate and finally, sliding the Z-motor and Z-screw back in the original Place.
Hardware Required= 8 M3 bras heat insert (for the Z-Nuts Retainers), (the longer the merrier, I used 6mm long ones). And 8 M3 30mm long screws that are holding both assemblies togeter.