CR-X Del Sol Gauge Cluster Rings
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Low-profile, snap-fit gauge cluster rings for the Honda CR-X del Sol. *1st photo for reference only*
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Honda CR-X del Sol — Low-Profile Gauge Cluster Rings
Low-profile gauge rings designed to add a subtle, finished appearance to the factory gauges without looking bulky or out of place.
Each ring features a contoured face and snap fit tolerances. No glue, double-sided tape, or permanent modifications required.
There are two files, one large ring and one small. You will need to print 2 of each.
🧪Printing Recommendations
- Material: ASA recommended for automotive interior heat resistance
- Layer height: 0.08–0.16mm
- Walls: 2 or more
- Supports: Required
- Fitment: Test fit before applying any paint or finish
⚠Due to the small snap-fit features, minor dimensional adjustments may be necessary depending on printer calibration and material shrinkage.
💅Finishing
The rings can be installed as printed or sanded, primed, and painted as desired.
⚠Avoid excessive paint buildup around the retention features, as this may affect fitment.
🛠Installation
Carefully align each ring with its corresponding gauge opening and gently press it into the factory bezel until seated.
⚠Do not force the rings into place. If fitment is excessively tight, inspect the printed retention area and adjust as necessary.