EuroCase - Eurobox compatible mATX PC Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made this Case because I was thinking about how much easier it would be to transport the case to Lan Parties..
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For this case u need to Solder main voltage connections! If u do not feel like doing this, u may should use a extension for the PSU mains connection. If u want to use an extension, u can contact me and i try to add a 3D model do integrate the extension.
Needed material for building the case:
m3*5 Heatinserts - x150 (+-10)
m3 Flathead
- 3*6 - x60 (+-5)
- 3*30 - x24 (for LED Ring use)
- 3*10 - x24 (without LED Ring)
- 3*8 - x14 (+-4)
- 3*12 - x12 (+-4)
m3 Countersunk
- 3*8 - x24 (+-4)
- 3*6 - x10 (+-4)
12mm Pushbuttons (x2) (link)
USB3 Adapter (link)
Schuko Adapter (link)
Acrylplate (mm x mm)
LEDs (ca. 1,3m) (Optional) (link)
BeQuiet! Cooler (Optional) (link)
The fans are mounted with m3 heatinserts, the PSU needs to be an SFX and die GPU limits should fit most custom GPUs with the LED ring.
I did make a fresh air intake for a BeQuiet! cooler, but it would need to be custom made for other mainboard models.
!! If u want a custom CPU tunnel u can contact me, I will try to make one with messurements from ur system. !!