1 / 2
Yamaha right fork lug guard
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A guard for the bottom of Yamaha KYB dirt bike forks
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 3
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Designed for Yamaha KYB SSS (48mm) forks.
Fits on the side without the brake disk.
The holes are wider than the bolts to allow for some 10mm diameter, 1mm wall steel tube to be used.
It has not broken on me yet, but this should allow tension to be maintained if it did.
You will need longer bolts than stock.
Printed on a Bambu P2S, using PA6-GF, 100% infill and supports.
Has a small amount of flex right at the back, but only when pulling from the inside out, which normally should not be an issue.