Core One L Display Cover Protector [MMU/Manual Swaps]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Display cover for Prusa CORE One L. MMU recommended; manual filament changes possible (11 for 3 colors).
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 19
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Core One L Display Cover Protector [MMU/Manual Swaps]
This is a remix of "Core One L _display cover protector , PRINT NO MMU" by Očko. I was too lazy to print the original design's parts separately and glue them together, so I wanted to let my MMU handle that job instead. Unfortunately, I ran into a slicer issue with the debossed logo: I couldn't get the slicer to use bridging instead of printing the logo’s perimeters in mid-air. Being the lazy person I am, I decided to redesign the whole thing so that the logo sits flush with the print bed. xD
Print Instructions
Print in the provided orientation, use the 0.2 mm Balanced profile.
I recommend enabling "Only one perimeter on the first layer" in the "Layers and perimeters" settings.
If you prefer to use the .stl file instead of the provided .3mf file, right-click the imported model, select "Split" -> "To Parts", and then assign the desired color to each part in the object list in the right-hand panel.
Printing with an MMU is recommended, but manual filament changes are also possible (11 changes for a three-color print).