LDO Voron Trident 300 Stealthburner Clockwork2 PTFE Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A guide to help the PTFE/reverse bowden tube do the somewhat sharp 90 degree bend into the Stealthburner CW2 extruder.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 12
- Makes
- 0
- Views
- 129
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
When using no guide or the 50mm radius guide from @Exerqtor_82339, then the reverse bowden tube scratches and drums against the top panel of an LDO Voron Trident 300 Rev.D+ with a Stealthburner Clockwork2 Filamatrix.
A 5mm smaller radius (45mm) seem to be enough to get it working together with @GalvanicGlaze_170963's Voron Bowden ptfe tube guide arm.
Print setting (basically voron settings, even when some don't make a difference for this model):
Material: ASA/ABS
Layer height: 0.2mm
Extrusion width: 0.4mm
forced Infill percentage: 40%
Infill type: gyroid
Wall count: 4
Solid top/bottom layers: 5
Supports: NONE