Faba disc with photoframe

Remixed from ntdesign to take a photo in the center and replicate the original faba disc :)
You can place a 43mm paper disc image

Original recommendation from ntdesign:
This is a template to create your own figurines for Faba audioplayers. These are great, because you only have to encode your files and write a code on the NFC tag. No need to buy content again, just digitize your old tapes ;-) No manipulation of the box itself, except taking out the SD card and writing your content on it. I use very cheap NTAG213 stickers from Aliexpress (25 mm, around 4,50USD / 100) and write to them with my iPhone and the app “NFC Tools”. There are free command line tools for encoding (https://github.com/wansors/myfaba-hacks), I use their windows app “RedEle” for convenience.
You can just use the slicer to add little figurines from printables or elsewhere to the base.

The way this base works: 
- print the bridge insert first
- print the base with a pause at 2.60 mm
- when it pauses put the NFC sticker in, then put the insert on top of it (open side facing down)
- the bridge insert should friction-fit or at least not move around laterally (scale it a tiny bit if this doesn't work out)
- continue print and observe the next layer: if the insert does not fit well it can stick to the nozzle
- this does not click into the little clips on the player like the originals, I found it too annoying and difficult for the kids to place the figurines. If you want this behaviour, just scale the base and insert up in the slicer by 0.2-0.4mm in x and y