1 / 2
Bird House Nest Box - Lift-Off Roof for Cleaning, Sized for Tits and Sparrows, No Supports (OpenSCAD) — image 1
1 / 2

Bird House Nest Box - Lift-Off Roof for Cleaning, Sized for Tits and Sparrows, No Supports (OpenSCAD)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A nest box for small garden birds with a lift-off roof for cleaning, drain holes and screw holes. No supports.

Rating
0 / 5
Likes
0
Downloads
7
Makes
0
Views
23
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

A nest box for small garden birds: blue tits, great tits and house sparrows. The roof lifts off so you can clean it out each autumn, the floor has drain holes, there are vents under the eaves and two screw holes in the back for a fence, shed or tree.

DETAILS

• Box 110 x 110 mm inside, 175 mm to the ridge; 32 mm entrance (set 25 for blue tits only, 28 for great tits) with a small perch.

• Two parts, both with no supports: the box is open at the top and its gable walls end in 45-degree slopes, and the roof prints as an L lying on one of its slopes. Bambu Studio: box 4 h 42, 169 g; roof 1 h 55, 59 g; no warnings.

• Use PETG or ASA outdoors. Put it 2 to 4 m up, facing between north and east, out of strong sun.

CUSTOMIZE (OpenSCAD)

Entrance diameter.

Designed with AI assistance (OpenSCAD). Rendered images; not printed yet.

Tags