Pumpkin Scarecrow Figurine/Keychain
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.14 – €1.39 net (excluding VAT)
For file: pumpkin_scarecrow_keychain_0.4n_0.1mm_PLA_MK4IS_1h35m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.26 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 1.59 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Pumpkin Scarecrow Figurine/Keychain
- Rating
- 0 / 5
- Likes
- 49
- Downloads
- 398
- Makes
- 0
- Views
- 818
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Autumn & Halloween
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Design Concept
The Pumpkin Scarecrow figurine is designed with whimsy and Halloween themes in mind, perfect for decorations or as a playful keychain accessory. The exaggerated facial expression and detailed outfit add personality and a seasonal charm.
Purpose
This 3D model can serve as a festive decoration for the Halloween season or as a unique accessory when converted into a keychain. It's small enough to be portable, yet detailed enough for display.
Printing Suggestions
Printed with PLA or PETG, this model benefits from a high-detail setting to capture the intricate designs of the facial and clothing features. Supports may be required for optimal detail preservation.
Assembly Instructions
No assembly is required for this model. Once printed, it can be directly used, or a keychain ring can be attached if preferred.
I printed in PLA
Figurine
Infill: 15%
Layer Height: 0.20mm
Brim: No
Supports: Yes, Organic
Seams: Back/Rear
Keychain
Infill: 15%
Layer Height: 0.10mm
Brim: No
Supports: Yes, Organic
Seams: Back/Rear
If you like my work consider