1 / 4
Raspberry Pi Mount for IKEA Skadis
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Open mount to hang a Raspberry Pi 3B+, 4 or 5 from an IKEA Skadis peg board.
- Rating
- 4.938 / 5
- Likes
- 178
- Downloads
- 1,028
- Makes
- 19
- Views
- 5,722
- Reviews
- 16
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Open mount to hang a Raspberry Pi 3B+, Pi 4 or Pi 5 from an IKEA Skadis peg board using CSD_Salzburg’s Skadis universal hook.
3 versions available:
- raspberry_pi_skadis_mount - (Pi 3/4 only) No extra hardware needed, Pi clips into place.
- raspberry_pi_skadis_mount_rpi5 - (Pi 5 compatible) Same as the original Pi 3/4 mount but one clip moved to accommodate the Pi 5. Should still work with the 3 or 4.
- raspberry_pi_skadis_mount_for_m2.5 - No clips, Pi secured by 4 M2.5 screws. Compatible with all.
The Pi can be mounted in any direction using 2 universal hooks.
Recommend printing everything above the 4.5mm base at 100% concentric infill (or increase the number of perimeters/walls) to achieve the best quality mounts and clips.
No supports needed.