ChatGPT Enter Key (for Logitech MX Mechanical) +customizable Keycap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ChatGPT Enter key for the MX Mechanical, so you can still reliably send prompts after ChatGPT replaced your brain.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Many people today can no longer function without ChatGPT. Emails, decisions, opinions: everything needs a prompt. But years of outsourcing every thought have left users with severely reduced cognitive abilities, and for many, even finding the Enter key has become a real challenge.
That’s dangerous. No Enter key means no prompt. No prompt means no ChatGPT. And no ChatGPT means you’re completely lost.
This keycap replaces the standard Enter key on the Logitech MX Mechanical with a high-contrast version and a logo you can spot instantly. No searching, no thinking required. Even with your last remaining brain cell, you’ll always find the one key that gets you through life.
It comes in three versions. The raised logo version can be printed without an MMU, and the logo can also be felt without looking. If you have an MMU and prefer a cleaner look, there’s an inlay version with the logo flush in the surface. There’s also a blank version without a logo that you can customize however you like. All tolerances have been tested on a real Logitech MX Mechanical.
My print settings
PLA
Connector: 0.1 mm layer height, no supports
Keycap: 0.2 mm layer height with the ChatGPT logo (for more detailed custom logos, 0.1 mm is recommended), supports needed if Logo is facing upwards
Printing without an MMU (raised logo)
Print the keycap with the logo facing up and enable supports.
In PrusaSlicer, go to the first layer of the logo and insert a color change there.
Creating a custom Enter key
Import the blank keycap into PrusaSlicer.
Right-click the keycap, choose “Add part” and select “SVG”.
Load your logo (it has to be a svg file) and set its height (I recommend 0.4 mm).
Scale and position it as you like, and you have your own custom Enter key.
Instructions for Print and Assembly
Print 1 keycap and 1 connector.
Glue the connector into the recess on the underside of the keycap.
Press the keycap onto the Enter switch of your MX Mechanical.
Happy printing and leave a like if you appreciate my work!