Hamster Hideout - Little Cottage with Two Arched Doors, Shingled Roof and Vents (OpenSCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A little cottage for hamsters, gerbils and mice, with doors at both ends so nobody gets cornered.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 17
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A little cottage for hamsters, gerbils and mice, with pointed-arch doors at both ends so nobody gets cornered, arched windows, a shingled roof and air vents. It has no floor, so you lift it off to clean.
DETAILS
• 130 x 90 mm and 95 mm tall, with 60 mm doors (big enough for Syrian hamsters).
• Prints with no supports: the roof is 45 degrees inside and out, every opening has a pointed top, and the shingle grooves and vents are cut square to the roof, so their sides are 45 degrees too. Bambu Studio: 2 h 55, 89 g, no supports.
• Pets chew: check it often, and use PLA or PETG with no sharp bits left from printing.
CUSTOMIZE (OpenSCAD)
Length, width, wall height, door width and number of windows.
Designed with AI assistance (OpenSCAD). Rendered images; not printed yet.