1 / 4
Syringe Holder for Tiptipot Novimol 50ML — image 1
1 / 4

Syringe Holder for Tiptipot Novimol 50ML

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I split the two designs into separate files and gave each one an illustration showing the holder (teal) on the bottle.

Rating
0 / 5
Likes
2
Downloads
8
Makes
0
Views
27
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

I split the two designs into separate files and gave each one an illustration showing the holder (teal) on the bottle with the syringe in place: collar_holder_illustration.png and stand_holder_illustration.png. The collar version is option 1, the one you’re trying first, and it now uses your 42.8 mm body measurement.

Here are short Printables descriptions you can paste in:

Option 1: Baby Syrup Syringe Holder (Neck Collar)

A small clip that keeps the dosing syringe attached to the medicine bottle so it never gets lost. The collar slides over the bottle threads and sits where the tamper ring was. The syringe snaps into a side tube and hangs right next to the bottle, and the cap still closes normally.

The tube has three grip ribs and a flex slot, so the syringe clicks in, stays put, and pulls out easily when you need it.

Fits

  • Novimol / Tiptipot 60 ml bottle (26.8 mm thread, 42.8 mm body)

  • 11 mm oral dosing syringe

How to use

  1. Snip off the loose tamper ring under the cap.

  2. Slide the collar over the threads, with the flat side facing up.

  3. Push the syringe tip-first into the tube until the flange rests on top.

Print settings

  • Orientation: as exported, flat face on the bed. No supports needed.

  • Material: PETG recommended (easy to wash, slightly flexible). PLA also works.

  • Layer height: 0.2 mm

  • Perimeters: 3

  • Infill: 20%, any pattern

  • Brim: not needed


Option 2: Baby Syrup & Syringe Stand

A compact stand that keeps a baby medicine bottle and its dosing syringe together on the shelf or nightstand. The bottle drops into a round cup and the syringe snaps into an upright tube beside it. The bottle isn’t modified at all.

The tube has three grip ribs and a flex slot, so the syringe holds firmly and still comes out easily. A small drain hole under the syringe lets it dry after washing.

Fits

  • Novimol / Tiptipot 50 ml bottle (38.7 mm body)

  • 11 mm oral dosing syringe

How to use

  1. Place the bottle in the cup.

  2. Push the syringe tip-first into the tube.

Print settings

  • Orientation: as exported, base on the bed. No supports needed.

  • Material: PETG recommended. PLA also works.

  • Layer height: 0.2 mm

  • Perimeters: 3

  • Infill: 15–20%

  • Brim: not needed