Gridfinity Set – fits IKEA MAXIMERA 40 cm Drawer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gridfinity baseplate set sized to the published 280 x 504 mm inner floor of the 40 cm MAXIMERA drawer.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 24
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Gridfinity baseplate set for the 40×60 cm MAXIMERA (METOD kitchen) drawer, sized to IKEA's published inner floor of 280 × 504 mm. Three tiles (6×4, 6×4 and 6×3) plus edge strips.
Dimensions used (manufacturer-published inner sizes):
IKEA customer service (SE), MAXIMERA inner dimensions, narrowest side (floor): https://www.ikea.com/se/sv/customer-service/knowledge/articles/2f2d5df3-50gg-4939-gfef-150779b2c4e2.html
Cross-check: drawer-mat supplier, 28.0 × 50.4 cm floor, 32.0 cm wide at 55 mm height: https://www.itsdesign.se/en/blog/post/measurement-guide-for-ikea-maximera-drawers
How it works: plain Gridfinity baseplate tiles (lightweight, open-bottom, 42 mm standard) butt together, and plain spacer strips fill the gap to the walls, so nothing slides. No glue and no snap clips. Every part fits a 256 × 256 mm bed. Print the fit-test corner first.
Estimated print time and filament (Bambu Studio slicer estimate, A1, PLA, 0.2 mm, 15% infill, 3 walls, no supports):
MAXIMERA 40×60 cm (inner floor 280 × 504 mm): about 4h26m and 172 g PLA in total
⚠ Honest note: the images are renders. Designed from the published dimensions and not print-tested yet (my printer hasn't arrived). Please print the fit-test corner first. 🙏 If you print it, please post a Make and comment on the fit (tight / loose / perfect, and by how many mm). I'll update the files.
The drawer sides slope outward (narrowest at the floor), so the set is sized to the floor. Bins get extra room higher up.
Corrected version. An earlier version used the overall drawer size (364 × 542 mm) and did not fit.
Fits the 40×60 cm drawer in any height (low/medium/high), because the floor is the same [assumption: IKEA lists one floor size per width].
Unofficial accessory, not affiliated with or endorsed by the brand owner. Names describe fit only. STL + STEP included. Licence CC BY-NC-ND 4.0. Designed by Southern Cross Shed, Perth, Australia.
Parts per set
MAXIMERA 40×60 cm (inner floor 280 × 504 mm)
Inner size used: 280 × 504 mm → footprint 278.0 × 502.0 mm (2 mm total clearance); grid 6 × 11; tiles 3; side strips 13.0 mm, end strips 20.0 mm (omitted if < 3 mm)
drawer280x504_baseplate_6x4.stl × 2
drawer280x504_baseplate_6x3.stl × 1
drawer280x504_side-strip_13.0x168.stl × 4
drawer280x504_side-strip_13.0x126.stl × 2
drawer280x504_end-strip-R_20.0x139.stl × 2
drawer280x504_end-strip-L_20.0x139.stl × 2
drawer280x504_fit-test-corner.stl × 1