Gridfinity Sets – fits IKEA MAXIMERA 60/80 cm

Gridfinity baseplate sets for MAXIMERA (METOD kitchen) drawers, 60 and 80 cm wide, in the 60 cm and 37 cm depths. Each is sized to IKEA's published inner floor.

Dimensions used (manufacturer-published inner sizes):

• IKEA customer service (SE), MAXIMERA inner dimensions, narrowest side (floor): https://www.ikea.com/se/sv/customer-service/knowledge/articles/2f2d5df3-50gg-4939-gfef-150779b2c4e2.html

How it works: plain Gridfinity baseplate tiles (lightweight, open-bottom, 42 mm standard) butt together, and plain spacer strips fill the gap to the walls, so nothing slides. No glue and no snap clips. Every part fits a 256 × 256 mm bed. Print the fit-test corner first.

Estimated print time and filament (Bambu Studio slicer estimate, A1, PLA, 0.2 mm, 15% infill, 3 walls, no supports):

• MAXIMERA 60×60 cm (inner floor 480 × 504 mm): about 6h42m and 260 g PLA in total

• MAXIMERA 80×60 cm (inner floor 680 × 504 mm): about 8h52m and 348 g PLA in total

• MAXIMERA 60×37 cm (inner floor 480 × 309 mm): about 4h00m and 153 g PLA in total

• MAXIMERA 80×37 cm (inner floor 680 × 309 mm): about 5h20m and 204 g PLA in total

⚠ Honest note: the images are renders. Designed from the published dimensions and not print-tested yet (my printer hasn't arrived). Please print the fit-test corner first.

🙏 If you print it, please post a Make and comment on the fit (tight / loose / perfect, and by how many mm). I'll update the files.

• The drawer sides slope outward (narrowest at the floor), so the sets are sized to the floor.

• The 40×37 cm drawer is not included: IKEA's table lists it as 50.4 × 30.9 cm, which looks like a typo (wider than the 40×60 drawer's floor).

Unofficial accessory, not affiliated with or endorsed by the brand owner. Names describe fit only. STL + STEP included. Licence CC BY-NC-ND 4.0.

Designed by Southern Cross Shed, Perth, Australia.

Parts per set

MAXIMERA 60×60 cm (inner floor 480 × 504 mm)

• Inner size used: 480 × 504 mm → footprint 478.0 × 502.0 mm (2 mm total clearance); grid 11 × 11; tiles 6; side strips 8.0 mm, end strips 20.0 mm (omitted if < 3 mm)

MAXIMERA 80×60 cm (inner floor 680 × 504 mm)

• Inner size used: 680 × 504 mm → footprint 678.0 × 502.0 mm (2 mm total clearance); grid 16 × 11; tiles 9; side strips 3.0 mm, end strips 20.0 mm (omitted if < 3 mm)

MAXIMERA 60×37 cm (inner floor 480 × 309 mm)

• Inner size used: 480 × 309 mm → footprint 478.0 × 307.0 mm (2 mm total clearance); grid 11 × 7; tiles 4; side strips 8.0 mm, end strips 6.5 mm (omitted if < 3 mm)

MAXIMERA 80×37 cm (inner floor 680 × 309 mm)

• Inner size used: 680 × 309 mm → footprint 678.0 × 307.0 mm (2 mm total clearance); grid 16 × 7; tiles 6; side strips 3.0 mm, end strips 6.5 mm (omitted if < 3 mm)