SMLIGHT SLZB-MRxU wall/HSW mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attach it to a wall or a HSW (Honeycomb Storage Wall) lattice using M4 countersunk screws.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
how to print
1 universal model provided. The screw gaps have been calculated to match HSW's lattice.
Print with the bottom on the build plate, as provided. No supports required.
Electronic devices can get quite warm. Do not print in PLA. PETG is advised.
how to use
Countersunk screws, M4 (base < ⌀4, top < ⌀8).
Attach it to the wall/HSW folling below instructions.
Then simply push the device in.
wall mounting
Vertical mounting: use screw in one of the top holes. Screw in one of the bottom holes is optional.
Horizontal mounting: use screws in the 2 inner/middle holes.
HSW mounting
Follow instructions on the dedicated page.
links to components
(these are affiliate links, using them will cost you nothing, but will support my work)
(you can try and browse for other cheaper sellers, those are the ones i ordered from)
selftapping countersunk screws (M4 variants)
countersunk bolt screws (M4 variants)