iPad modular support for DJI Mavic Pro remote - remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed BlaiseB Ipad support to support easily removable pads. Current Pads are for the iPad Pro 9.7" (6.5mm…
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 72
- Makes
- 1
- Views
- 616
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Remixed BlaiseB Ipad support to support easily removable pads.
Current Pads are for the iPad Pro 9.7" (6.5mm thickness).
If there is a demand I can make the pads slanted to support a wider range of tablets or make the STL files publicly available.
The Pads appears to be a very good no-slip version for any tablet. Even without tightening the support structure with sandows, it seems impossible to slide the iPad out of the support.
Print Settings
Printer Brand:
FlashForge
Printer:
Dreamer
Rafts:
No
Supports:
Yes
Resolution:
200 microns
Infill:
50% for supports. 15% for pads
Notes:
Sliced with S3D. Printed Support in Black PLA, 4 shells, 50% infill. about 3hr 20 min per support. Printed with supports, but can probably be printed without if your printer is able to handle bridging nicely.
Printed pads in FormFutura FlexiFill at 230ºC, Bed at 110º, with support + skirt.
about 1 hour per pad. I would think any elastomer is fine. I noticed no shrinkage with this elastomer.
I've modified my FF Dreamer with a 3mm Boride glass plate + MicroSwiss metal extruders.
How I Designed This
Modified Fusion File
Modified BlaiseB Fusion 360 files for "iPad support for DJI Mavic Pro Controller"
Category: R/C Vehicles