Depth Stop for Makita Plunge Saw
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Depth Stop for Makita SP6000J Plunge Saw
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 69
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Depth Stop for Makita SP6000J Plunge Saw:
Improvements over the original:
◦ Corrected depth stop for measuring cutting depth on a plunge saw with a guide rail
Recommended Print Settings: 🖨⚙
◦ Material: PLA, PETG
◦ Nozzle diameter: 0.6 mm
◦ Layer height: 0.2 mm
◦ Infill: Honeycomb 30%
◦ Print speed: Infill 30 mm/s, Perimeters 25 mm/s (Print time ~ 32 min)
◦ Print orientation: As in depth_stop.stl file
◦ Support: No
◦ For two-color printing, set M600 at layer 64
Preparation before mounting on a plunge saw:
◦ 1) Remove the spring and wing screw from the original Makita depth stop:
◦ 2) Insert the wing screw with a washer from the top side of the model, and attach the spring from the underside (where the model has a larger opening for the spring):
✔ Done, you can now mount the depth stop onto the saw.