Customizable Ratchet and Pawl Desktop Model - 12, 18 and 24 Teeth (Educational)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rocking hand-crank ratchet with 12, 18 and 24 teeth. Untested classroom design; assembled STLs are layout references.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 27
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Noncommercial
CUSTOMIZABLE educational desktop model: compare 12, 18 and 24 tooth ratchet wheels with a rocking hand crank. For students and teachers to study one-way motion. The supplied presets use an 80 mm wheel diameter and 5 mm tooth depth.
UNTESTED DESIGN STUDY. This model has not been printed, assembled or physically operated. It is not a load-bearing ratchet, brake, hoist or safety device. The assembled STLs are layout references, NOT validated print-in-place files. Separate the moving components, inspect/repair the meshes in a slicer, and test-fit before printing a classroom set.
How it is intended to work
Rock the red handle anticlockwise, as seen from the front, to drive the wheel. Return it clockwise. The red drive pawl travels with the handle; the green holding pawl is intended to resist rollback. Gravity biases the pawls toward engagement in the upright orientation. No spring is included. Actual engagement, friction, pawl bounce and reliable return need a physical test print.
Presets and strokes
12 teeth: nominal wheel step 30 degrees; suggested handle stroke at least 34 degrees.
18 teeth: nominal wheel step 20 degrees; suggested handle stroke at least 24 degrees.
24 teeth: nominal wheel step 15 degrees; suggested handle stroke at least 19 degrees.
The extra travel lets the holding pawl pass and drop behind a tooth. These strokes are starting values, not tested performance.
What is included
Three assembled native STL references, three full native Playground recipe TXT files, and a five-page Playground/customization guide PDF. All presets fit a 140 x 126 x 72 mm assembled bounding box, with Y up.
Mesh checks and limits
12 teeth: 4,632 triangles. 18 teeth: 4,872. 24 teeth: 5,112.
Each raw native export contains 12 zero-area triangles at circular bore seams. These remain in the files. Excluding those facets only for diagnostics, the remaining surfaces have zero boundary edges and zero non-manifold edges. Fixed parts overlap as separate shells, un-unioned. This is not a printability certification.
Clearance evidence
Hand calculation plus a separate 2D numeric polygon sweep, every 0.25 degrees through a full turn. Feasible pawl-lift paths were found at all sampled phases with zero polygon overlap. No native /intersect result is claimed because that tool refuses the /sm_part Groups. The 0.10 mm computational contact-envelope margin is NOT a printer tolerance or physical running gap. Nominal axle/pawl-pin radial clearance is 0.5 mm; wheel-to-lever axial gap is 3 mm. Printer tolerance can reduce these gaps.
Customize in TrueGeometry Playground
Pick one complete 12/18/24 tooth recipe. Start a fresh scene, open Script, paste ONE numbered chunk, use plain Run, wait, then continue. Keep creation chunks separate to avoid /tag_last races. Tooth count presets are supplied. Diameter and tooth depth require regenerated profile coordinates and another motion check, not changing a comment or a slider.
Full Playground commands, tables, FAQs and all build images:
https://blog.truegeometry.com/0_0_0_0/blogs/post-c91c19b5.html
The commands are also in the three attached recipe files. The guide shows where to paste them and how customization works.
Native technique: /sm_hole adds real pivot bores directly to /sm_part profiles, without boolean cuts. All model construction uses native Playground commands. No external CAD geometry or mesh repair was substituted.
Community test prints welcome
If you print and assemble a revision, please post a Make and tell us about the axle fit, pawl fit, reliable tooth capture and handle travel. CAD renders are shown, not photographs of printed parts.
AI-assisted design. License: CC BY-NC 4.0. Share and adapt with attribution to TrueGeometry for non-commercial use. Commercial use requires consent from TrueGeometry. Educational use remains subject to the license.