Canyon Headset Tool Handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the handle for the Canyon headset tightening tool
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 17
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I found myself needing a Canyon headset tool but they are out of stock. I wanted something quick which is what we have McMaster Carr for. 4mm x .5 threaded rod, part number 98861A582. This is enough rod to make at least 4 of the tools. I would add glue if you plan to use it a lot and print from something durable. I do not use mine much so i printed from ABS and did not glue it. Don't over tighten it as it could crack it.
Print with the point up and the handle down vertically. This is best for holding the rod and i made the end of the handle flat for that reason. 100% infill, .16 layers and 4 walls makes a tough tool.