Voronoi Eagle Owl Lamp – No Supports, LED Tealight
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Realistic eagle owl lamp from a real museum specimen scan, with a Voronoi lattice body. One part, no supports
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 30
- Makes
- 0
- Views
- 133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Standard Digital File License
A Eurasian eagle owl (Bubo bubo) lamp built from a 3D scan of a real specimen at the Muséum national d'Histoire naturelle, Paris. The face, ear tufts, feathers and talons are true to the animal; the body is an organic Voronoi lattice that casts a cell pattern on the walls when lit. Eyes were re-sculpted with cornea, iris and pupil so they catch light like real ones.
One part. No supports. No glue. Drop it over an LED tealight and it glows.
Files
Voronoi_Eagle_Owl_Lamp.3mf — plate ready for Bambu Studio, OrcaSlicer and PrusaSlicer (no supports, 0.2 mm)
Voronoi_Eagle_Owl_Lamp.stl — the same model for any slicer, already oriented and on the bed
README.txt — print settings, LED guide and assembly
Size
156 mm tall, 116 × 82 mm footprint, Ø40 mm opening in the base. About 4 h 30 min and 71 g of PLA at 0.2 mm.
Print settings
Setting | Value |
|---|---|
Supports | Off — supports would be trapped inside the lattice |
Layer height | 0.2 mm |
Walls | 2 |
Infill | 15% gyroid |
Top / bottom layers | 4 / 3 |
Brim | None |
Elephant-foot compensation | 0.15 mm |
Material | PLA, matte white or ivory (silk white for a pearly glow) |
Orientation | Upright, as supplied |
Needs 120 × 85 × 160 mm of build space. Tested on a Bambu Lab X2D. The lattice gets fine near the head: dry filament and slightly slower outer walls give the cleanest result.
LED: what to buy
A battery LED tealight, the flameless kind sold in packs:
Ø38 mm (1.5") standard size — the opening is Ø40 mm
Up to 50 mm tall including the plastic flame
Warm white 2700–3000 K
CR2032 coin cell, or USB-rechargeable
Optional: flicker/steady modes, remote control or timer
Search "LED tealight warm white 1.5 inch". Do not use a real candle or a hot bulb — PLA softens around 60 °C.
Assembly
Switch the LED tealight on.
Set it on the table.
Lower the owl over it through the Ø40 mm opening in the base.
Lift the owl to switch modes or swap the battery.
Credit
Based on "MNHN-ZO-MO-2003-2723 Bubo bubo", e-COL+ Muséum national d'histoire naturelle, CC BY. Lamp design and remix by Alex Tosetto, CC BY 4.0.
Please share a Make if you print one!
NEW - Bambu Lab H3C: Voronoi_Eagle_Owl_Lamp_H3C.3mf is re-centred on the 330 x 320 mm H3C plate, with the official H3C machine G-code. Sliced in Bambu Studio 2.09.