Break-Action Toy Shotgun Kit – Long Gun & Sawn-Off
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Break-action toy shotgun with exposed hammers. Swap the stock and pull one pin to turn the long gun into a sawn-off.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 74
- Makes
- 1
- Views
- 447
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
One receiver, two guns: a break-action double-barrel toy that turns into a sawn-off in a minute
⚠ This is a toy / display prop. It cannot fire anything and is not a weapon. Please follow your local rules on realistic-looking replicas. Don’t carry it in public, and paint or print the muzzle device in a bright colour if your local rules require it.
This is a fully printed toy double-barrel shotgun with exposed hammers. You get two configurations from one receiver: a full-length long gun and a compact sawn-off. Switching takes about a minute and needs no tools.
🔁 Long gun ⇄ sawn-off in a minute
Interchangeable stock. The full stock and the pistol grip mount on the same receiver. Swap one for the other.
Detachable barrel extension. The long barrel is the short barrel plus a front extension. Pull one pin and take off the front barrel. Fit the short forend and lock it with the second pin, and you have a sawn-off.
One set of parts. Print the receiver, the barrels and the action once, and you have both guns.
🧩 No glue, no screws
Every joint is a snap fit, a dovetail or a printed pin. Each part has its own place to go, and you can take the gun apart and put it back as many times as you like. The pins come in two styles: with heads, or flush. Print whichever you prefer.
💥 A working break action that takes shells
Push the top lever and the barrels tip down on the hinge. Drop in two printed shells (red hulls with brass heads, 8 included) and snap it shut. The toy fires nothing: the barrels are open straight through and there are no strikers. The fun is in the mechanism, not in launching anything.
🔨 Rubber-band hammers and double triggers
The two exposed hammers are powered by rubber bands. Cock each one by thumb, and each trigger drops its own hammer with a satisfying click. It works just like a classic coach gun.
🎒 Accessories (all optional, all clip-on)
Muzzle devices. A flash hider, a round silencer and a square silencer, plus a twin can for the sawn-off. Spring fingers inside each sleeve hold it firmly on the muzzle, even in PETG.
Decorative flashlight. It has a screw-on head and clamps around the barrels in front of the forend.
Shell holders. A 6-round holder clips onto the stock, and a 2-round holder clips under the sawn-off forend. The shells push in and stay put.
Butt pad and stock medallion.
🖨 Printing
Tested on a Bambu Lab P1S in PETG.
No AMS needed. Each of the 6 plates prints in a single colour:
Barrels (dark steel)
Receiver and metal parts (silver)
Wood parts: stock, grip, forends, shell holders (brown)
Brass parts: pins, triggers, shell heads, medallion
Shell hulls and flashlight head (red)
Muzzle devices, butt pad, flashlight clamp and body (black)
Layout. Parts are oriented for printing without supports wherever possible.
Hardware. The only non-printed parts are small rubber bands for the hammers.