Apple Keyboard (M0487) Dome Fix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A pad and plug to help a fatigued dome return to its original position.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 10
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
The keyboard that came with my Macintosh Classic II worked just fine, but the right shift key was "lazy." It would record being pressed but the key itself would not spring back into position like the other keys - just sort of lay there flat. Upon disassembly of the keyboard, I discovered the dome that lifts the key back into its position wasn't torn, but fatigued. If it was given a little boost, the dome would spring back to its original location and lift the key back into its proper elevation.
After printing the dome support, I needed a way to make sure the small spring that makes contact with the keyboard circuit panel was able to continue to make contact. Fortunately, a simple plug that fits in the end of the spring did the trick.
Upon reassembly, the key works great. I can tell the shift key has a slightly different feel when in use, but nothing that is terribly noticeable. The only other repair I could find was to cut out the dome of another key and transfer it in place of the fatigued dome. Not a bad idea if you have an extra keyboard lying around as parts. Not having that, I'm thrilled this turned out as good as it did.
I printed in ABS, mainly because that was what was loaded in my printer. TPU would likely be perfect for this application, but I haven't tackled that yet. PLA should be fine as well.