1 / 2
Wicked edge WE130 bar extender
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bar extender for those cases where your blade is too high above the clamp to sharpen a larger angle.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 7
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Open Community License v1.1
This is a bar extender for the WE100 series, tested on a WE130. I needed more length to sharpen the blade of a planer. It works for some blades and angles but not for everything so just try if it works for you.
I dont model threads usually but use a tap and cutter, the threads on this are M6, if you need anything different modify the included freecad file.
My first prints were in PETG but this is is a bit too flexible so print in PCCF or PA to avoid this.