Monitor stand with pull out storage drawer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Monitor stand/riser with integrated storage drawer. No supports needed.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 10
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
Update 10/31/26 - I added version with the base in the same wedge shape and size as the actual monitor base (drawer is also slightly resized but still rectangular so it works properly). This can only be printed at full size on the Core One L or XL. It is literally just a few mm too big for the Core One, but you could resize both it and the drawer by 97% to fit.
I wanted a monitor riser to match the HP Mini desktop computer I am using for the other one of my two monitors so made a rectangular base with a central support. I added a pull out drawer that is mostly divided by the support into two compartments. The monitor itself is a Dell U2724D, but this will work for most monitors.
Print the "Base" upright with the back face down on the build plate, and the "Drawer" should be printed bottom-down. If I had a Core One L then I could have matched the full size and shape of the silver stand base but with an MK3S+ I pretty much maxed out the build plate as I could.