Wind Chime
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wind chime printed Creality CR-10 Smart Pro using ABS
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 10
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
This was simply a whim to see if I could print tubes 300mm H X 25mm Dia X 2mm thickness on my CR-10 Smart Pro (The height could be edited using the .stl's to print on printers that have a Z axis less than 300mm). I did try printing 350mm tube but got uneven results at the top of the 350mm tube.
I used ABS plastic as the chimes are meant for outdoor use and PLA could warp if the ambient temp got too high.
The thickness of 2mm for the tubes was selected so they would be sturdy enough to stand up to a strong wind but thin enough to resonate.
N.B. I found that I needed to print the tubes individually to avoid failure