Modern ColorMix spiral planter (Parametric)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A take on a Modern spiral planter with ColorMix support using the Prusament CYMK bundle. Customizable with OpenSCAD.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 8
- Makes
- 0
- Views
- 27
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
A colorful take on the classic Modern spiral vase. I used AI to help write an OpenSCAD file, and then colored the model by hand in PrusaSlicer. For a different version that does not use AI, see my other model here:
Print instructions
This model is designed for the Prusament PLA CMYK Bundle loaded in the following order: Cyan, Magenta, Yellow, White
no supports
Intended Filament: Prusament PLA CMYK Bundle
0.15mm layer thickness maximum
For more info, see the ColorMix article: https://help.prusa3d.com/article/colormix_1210432
Customization
Want slightly different geometry? Open vase.scad in OpenSCAD and adjust these parameters:
height mm
Height of the model
twist_angle degrees
How much a single rib twists from the bottom of the vase to the top
num_ribs
Number of ribs
rib_depth mm
How thick the ribs are
wall_thickness mm
How thick the wall behind the ribs is
base_thickness mm
How thick the base is
num_drain_holes
How many drain holes to put around a single center hole. If zero then no holes, not even a center hole.
r_base mm
Radius of the base of the vase