1 / 7
Customizable Fan-to-Duct Stepped Reducer - 120 mm to 80 mm — image 1
1 / 7

Customizable Fan-to-Duct Stepped Reducer - 120 mm to 80 mm

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Parametric stepped reducer: 120 mm case fan to 80 mm round duct or hose. Support-free taper, real bores, no Booleans.

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
14
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

Hook a 120 mm case fan to an 80 mm round duct or hose - with a stepped taper that prints with ZERO supports. Every dimension is a variable: fan size, pipe size, step height, spigot length. Built entirely with native TrueGeometry Playground commands: no external scripts, no Boolean unions.

WHAT YOU GET

- Mounting flange with 4 real fan bores (105 mm spacing) and a 110 mm opening

- 4 stepped reducer rings - flat ledges instead of an overhanging cone, so nothing needs support

- 30 mm hose spigot for clamps or foil tape

- The full recipe (attached .txt) with all variables at the top

MAKE IT YOURS (this is the point)

Open the free TrueGeometry Playground (link below), click Script, paste the recipe, change a line, click Run. Set $PIPE to your duct's OD (hose: ID minus 1 mm for a slip fit). Presets for 60 / 80 / 100 mm ducts included.

HONEST NOTES

- Not yet test-printed. If you print one, please post a Make and tell us what to fix.

- Rings overlap their neighbors by ~2 mm on purpose. Do NOT union the shells - your slicer merges the overlaps.

- AI-assisted design, checked numerically in the Playground (collision check: no flags).

PRINTING

Print flange-down, no supports. PETG handles duct heat and hose-clamp pressure better than PLA.

FILES

- FanDuct_120to80_Assembly.stl = the main model

- Part_*.stl = flange, steps and spigot separately

- FanDuct_120to80_recipe.txt = the full Playground recipe

- FanDuct_120to80_Playground_Guide.pdf = how to run + customize, with preset cards

Blog article (technique, presets, FAQ): https://blog.truegeometry.com/0_0_0_0/blogs/post-0a3d7b49.html  

Run it in the Playground: https://www.truegeometry.com/CoreWebGLTG/KBEAgentHTTP.html 

License: CC BY 4.0 - print it, remix it, sell your prints, just credit TrueGeometry.